The AXYZ 10000 Series CNC Router is the largest standard width format that AXYZ manufactures. The 10000 Series was originally conceived and delivered for Recreational Vehicle manufacturers. The demand for a robust, reliable CNC solution for RV sidewall fabrication led many of these manufacturers to the capacity of the 10000 Series. The 10000 Series has a processing width of 3200mm to allow a full size sheet of material to be loaded and processed. The 10000 Series is built in sections for ease of travel and on site assembly. Each Section is 2440mm long which allows standard processing lengths from 1830mm to 14m and beyond in 2440mm increments.
Custom machine surfaces can be supplied for the 10000 Series, depending on the application requirement. For large panel wall applications, an integrated roller transfer system has been built into the deck for material handling. Other applications have seen standard AXYZ Vacuum decks, or custom clamping systems designed and integrated.
While most AXYZ International CNC Routers can be installed and commissioned in a day or less, the 10000 series calls for a more involved process to ensure true motion of the gantry and levelness of the working unit. This is accomplished by a team of professional installers and engineers who will be sure your investment is working to the factory spec when they are done.
The AXYZ 10000 Series CNC Router is used not only in the RV industry, but also in a wide range of manufacturing facilities, including Aluminium Fabrication (toolboxes), Signmaking, Lamination facilities and more.
The AXYZ 10000 Series is the choice of these facilities for its robustness, cost effectiveness and ease of use.
Standard Processing Width | 3200mm |
Standard Processing Length | 1830mm |
Optional Additional Length | 2440mm Increments |
Standard Gantry Clearance / Z stroke | 150mm / 255mm |
Optional Gantry Clearance | 200mm, 250mm, 300mm |
Drive System | X, Y Axis – Rack and Pinion Z Axis – Ballscrew |
Maximum Positioning Speed | 25m/min |
Control System | 7 Segment motion profile |
FPGA processor for high speed complex calculations | |
Dedicated true NC control – G and M codes | |
Ethernet connection | |
2 Gb onboard memory | |
Available options | Collet Spindles |
Automatic Toolchangers | |
Drilling options | |
Multiple Routing heads | |
Multiple Carriages | |
Material Handling systems | |
Pneumatic Material Location Pins | |
Vacuum Hold Down and custom clamping systems | |
Power requirements | 208-230 V 3 Phase / 440-460 V 3 Phase |